Homebutler logoSign Up
Circuit Breaker Keeps Tripping? Causes, Fixes, and When to Call an Electrician

Circuit Breaker Keeps Tripping? Causes, Fixes, and When to Call an Electrician

Published November 16, 2026

A circuit breaker trips to protect your home's wiring from overheating, so a breaker that trips repeatedly is telling you something. Sometimes the fix is as simple as moving a space heater. Other times it's a warning you shouldn't ignore.

Quick Answer

If a breaker trips when you run several high-power devices at once, the circuit is overloaded; move some of them to another circuit. If it trips instantly when you reset it or plug something in, there's likely a short circuit in a device or the wiring. If it's a GFCI breaker or outlet in a kitchen, bathroom, or outdoors, a ground fault from moisture or a faulty appliance is likely. Call an electrician if there's a burning smell, scorch marks, warm outlets, or a breaker that won't reset.

How to Reset a Breaker Safely

  1. Unplug or turn off everything on that circuit.
  2. Find the tripped breaker; it will be in the middle or "off" position.
  3. Push it firmly to off, then back to on.
  4. Turn devices back on one at a time to find the culprit.

If it trips again immediately with nothing connected, stop and call an electrician.

The Three Common Causes

CauseWhat it looks likeWhat to do
Overloaded circuitTrips when the microwave, space heater, or hair dryer runs with other devicesSpread devices across circuits; consider a dedicated circuit
Short circuitTrips instantly; may come with a pop, spark, or burning smellUnplug the suspect device; call an electrician if it's in the wiring
Ground faultGFCI trips in wet areas, often after rain or when a specific appliance runsCheck for moisture and faulty appliances; call an electrician if it persists

Arc-fault (AFCI) breakers, required for many living areas in newer homes, can also trip on damaged cords or loose connections.

Warning Signs That Need an Electrician Now

  • Burning smell from an outlet, switch, or the panel
  • Scorch marks, discoloration, or melted plastic
  • Outlets or switch plates that are warm to the touch
  • Buzzing or crackling from the panel
  • A breaker that won't reset, or trips with nothing plugged in

Never replace a breaker with a larger one to stop it tripping. The breaker is sized to protect the wire; a bigger breaker lets the wire overheat. Some older panel brands, including Federal Pacific (Stab-Lok) and Zinsco, have well-known reliability concerns; if you have one, ask an electrician to evaluate it.

What It Costs

An electrician's service call often runs a few hundred dollars or less for diagnosis and simple fixes like replacing a breaker or outlet. Adding a dedicated circuit or repairing damaged wiring costs more, and panel replacements are a larger project. Prices vary by region and local code requirements.

Get It Triaged and Find a Electrician

Describe what's happening in HomeButler and it sorts the problem into urgent or routine, tells you what to check first, and shows rated electricians near you so you can compare options and request quotes. When the job is done, the repair is logged to your home's history automatically.

Frequently Asked Questions

Is it dangerous if a breaker keeps tripping? The breaker is doing its job, but the cause can be dangerous. Repeated tripping with heat, smell, or scorch marks signals a fire risk.

Can a bad breaker trip on its own? Yes. Breakers wear out, and a weak breaker can trip below its rated load. An electrician can test it.

Why does my breaker trip when it rains? Moisture getting into an outdoor outlet, fixture, or junction box often causes ground faults. Have the location sealed or repaired.

How many things can I plug into one circuit? It depends on the circuit's rating and the devices. A typical 15-amp circuit can handle about 1,440 watts continuously (80% of capacity), so a space heater plus a hair dryer will often trip it.

Sign up free