Homebutler logoSign Up
AC Running but Not Cooling? 8 Things to Check Before You Call

AC Running but Not Cooling? 8 Things to Check Before You Call

Published November 16, 2026

An air conditioner that runs but doesn't cool is one of the most common summer service calls. Before you book one, a few checks can either solve the problem or tell you exactly what to tell the technician.

Quick Answer

Check that the thermostat is set to "cool" and the fan to "auto," replace a dirty air filter, and make sure the outdoor unit is running (reset its breaker once if it's tripped). If you see ice on the refrigerant lines or indoor coil, turn the system off and let it thaw. If the outdoor unit hums but its fan won't spin, or the system still won't cool after these checks, call an HVAC technician. Capacitor failures and refrigerant leaks are common causes that need a pro.

The 8 Checks

  1. Thermostat settings. Set to "cool," fan to "auto," and the temperature a few degrees below the current room temperature. Replace the batteries if the display is blank or dim.
  2. Air filter. A clogged filter is a leading cause of poor cooling and frozen coils. Replace it if you can't see light through it.
  3. Breakers. Most systems have separate breakers for the indoor unit and the outdoor condenser. Reset a tripped breaker once. If it trips again, stop.
  4. Outdoor disconnect. Check the shutoff box mounted near the outdoor unit; it may have been switched off or have a blown fuse.
  5. Is the outdoor unit running? The fan on top should spin and you should hear the compressor. If it hums but the fan doesn't spin, a failed capacitor is a likely cause.
  6. Dirty or blocked condenser. Clear leaves, grass, and debris at least two feet around the unit. Gently rinse the fins with a garden hose (not a pressure washer) with the power off.
  7. Ice on the lines or coil. Turn the system off, set the fan to "on" to help it thaw, and replace the filter. Ice usually points to restricted airflow or low refrigerant.
  8. Condensate drain. Many systems have a float switch that shuts down cooling when the drain line clogs. Check for water in the drain pan.

What Needs a Professional

  • Capacitor or contactor replacement. Capacitors store a dangerous electrical charge even with power off.
  • Refrigerant leaks. Low refrigerant means a leak somewhere; refrigerant doesn't get "used up." Handling it requires EPA certification.
  • Compressor or fan motor failure.
  • Repeated breaker trips.

What It Costs

Common repairs like a capacitor, contactor, or drain line clearing often run a few hundred dollars. Refrigerant leak repair varies widely, and a failed compressor on an older system often makes replacement the better value. Use the $5,000 rule in our repair-or-replace guide, and see Atlanta HVAC replacement costs for a local example.

Get It Triaged and Find a HVAC Technician

Describe what's happening in HomeButler and it sorts the problem into urgent or routine, tells you what to check first, and shows rated hvac technicians near you so you can compare options and request quotes. When the job is done, the repair is logged to your home's history automatically.

Frequently Asked Questions

How much cooler should the air from my vents be? A properly working system typically delivers air about 15–20°F cooler than the air going into the return vent.

Why is my AC running but the house won't get below a certain temperature? On extremely hot days, a system may struggle to keep up, especially if it's undersized, low on refrigerant, or has dirty coils. A clean filter and clear condenser help.

Should I keep running my AC if it's not cooling? No. Running a system with frozen coils or a failing component can cause more damage, including to the compressor.

How often should an AC be serviced? Once a year, ideally in spring before the cooling season, plus filter changes every 1–3 months.

Sign up free